Blog

Although home automation technology has been around for decades, only recently has LED light automation become a viable solution for all home and business owners. LED engineering has improved greatly in just the last 10 years and many of the technologies required for effective lighting automation have also improved.

That’s great news for people seeking better efficiency and performance from their lighting solution. With LED light automation it’s possible to achieve new heights in energy savings, occupant comfort and security.

What Are Some Effective LED Light Automation Products?

One of LED lighting’s many benefits is its controllability. No other lighting technology can be controlled as easily or with as much versatility as LED lighting. This extends to full LED lighting automation, as your LED fixtures can be controlled using the following automation technologies:

Timers

Timers are used to define when the light’s settings should change. This could be a change in output level or when the light is switched on or off.

Occupancy Sensors

Occupancy sensors detect when people are in the immediate area and switch the lights on in response. They also switch the lights off when the area is clear. Most occupancy sensors rely on motion to work, though some can also detect heat.

Photocells

Photocells are essentially light sensors. When they detect light, they react. When used with LED lighting, photocells can be used to switch the fixtures off when ambient light is present and switch them on when ambient light is absent.

Dimmers

Dimmers can be used to make precise adjustments to the lamp’s output. Dimmers come in many forms, from tactile control knobs to programmable solutions that bring the lights up or down at predetermined times.

Color Controls

Unlike other forms of lighting LED lights can output a full spectrum of colors depending on the chemical substrate that powers the LED’s semiconductor. With automated color controls users can specify what colors to display at any given time.

LED Light Settings Can Be Programmed In Advance

LED light automation isn’t just effective, it’s convenient. As the term suggests light automation technology is designed to run with minimal input. Once you’ve determined what your lighting controls should be set at those preferences just need to be programmed in. Set dates, times and your lighting’s configuration and the system handles the rest.

Modern lighting controls can even be programmed from your own device. This greatly simplifies management and is particularly useful for people responsible for managing a lot of LED lighting at once.

What Are The Benefits Of Automating An LED Lighting System?

Home automation has always promised compelling benefits for those willing to invest in the technology, but the technology has only become viable recently. Now that lighting automation solutions are now feasible for home and business owners there’s a lot to like about the technology. For example, with LED lighting automation you can look forward to the following:

Enhanced System Efficiency

Lighting is a primary energy expenditure for homes and businesses alike. If that lighting is on when people don’t need it, it’s a waste. Lighting automation technology ensures that your LED lighting is only on when people are present, minimizing waste and operating costs.

Improved Security

LED lighting automation can be used to switch the lights on when they are needed most for security purposes—at night. Photocells switch the lamps on when the sun is down. Timers can fill the same role. Motion sensors detect when potential intruders are nearby and switch the lights on as a warning. Lighting automation technology can also be used to power all the building’s lights on at once when someone is trespassing, and this can help law enforcement quickly respond to a potential break-in.

Reduced Maintenance And Manpower Needs

LED lighting automation extends each lamp’s life by powering them down when they aren’t needed. LED lighting already exhibits an impressive lifespan, but lighting automation enhances this and further reduces maintenance costs. Automation technology is also set-and-forget by design, so your LED lighting will require minimal babysitting once automation is in place.

Improved Lighting Performance And Aesthetics

No other lighting technology can be controlled as well as LED, down to the aesthetic level. With color controls, for example, users can change the lighting’s appearance in one room while leaving another room untouched. With dimmers, users can set their LED lights to slowly come up in the morning or slowly taper off in the evening for comfort or aesthetic reasons.

Compliance With Local Lighting Ordinances

LED lighting automation is also an effective solution for exterior applications, such as neighborhood parks and parking lots. Excess light pollution can be a problem for these settings, but automated lighting controls keep it under control. To keep nearby neighbors happy a neighborhood park could tie its LED lighting to timers that switch off when the park is closed. Dimmers, photocells and occupancy controls can also be used to control light spill in this way.

LED Lighting Automation Is A Wise Investment For Residential And Commercial Buildings

Automating your LED lighting will provide a compelling array of benefits—the kind of benefits that a residential or commercial property could benefit from.

In an office, LED light automation reduces waste and provides optimal illumination for productivity. In a warehouse or industrial facility LED light automation enhances security and safety with better color rendering and lighting performance. At the park LED light automation minimizes light pollution and ensures the park remains a good neighbor.

In the home LED light automation can do it all—reduce energy expenditures, ward off potential intruders, minimize lamp replacement and provide the kind of light that people are happy with.

That means LED light automation is no longer a far off, futuristic fantasy. Instead, it’s a viable present-day option for any home or business owner that wants more from their lighting solutions.

Well-designed commercial lighting systems enhance a property’s function and appearance, especially when they leverage LED technology. More and more commercial properties are turning to LED fixtures for their lighting needs, whether for a retrofit or for a brand new system. It’s easy to see why LED commercial lighting is so popular, as it represents an upgrade over fluorescent and HID fixtures in nearly every conceivable way.

What Should A Commercial Lighting System Consist Of?

Commercial lighting comes in many forms, and no matter what the property looks like or how it is arranged there is a commercial lighting system that makes sense.

Here are the most common commercial settings, and the lights that make the most sense for each:

1. Office buildings – Traditionally, office buildings have been fitted with panel and troffer fixtures, most of which utilize fluorescent technology. Troffers and panels are still the dominant fixture options, but LED technology is now the light engine of choice for offices. LED fixtures can emit close to neutral white light, while fluorescent tends to leave a greenish, pale cast over everything. Because LEDs emit in a color range more similar to natural sunlight, they help workers stay focused and alert. Several studies have confirmed the impact of natural light on employees, and have noted a productivity boost among those regularly exposed to it. LED technology offers the best and most cost-effective match to sunlight so companies can invest in their employees’ well-being while also getting efficient, reliable lighting.

   Some offices are doing away with the panel and troffer fixtures and are installing commercial lighting systems that are more appropriate for an open office layout. Open offices are gaining in popularity, as they are seen as a way to unify departments and encourage collaboration. Commercial lighting systems in open offices should enhance this approach, with extended rows of linear suspended lighting and some strategic pendant fixture placement.

2. Warehouses and storage facilities – Warehouses need maximum visibility and worker comfort more than anything else. When selecting warehouse lights the first decision is between high bay or low bay fixtures. High bay lighting is more appropriate for any building interior where the ceiling is at least 20 feet high. At this height the lighting must be specialized so that it can adequately illuminate the ground. This usually means adding a bulky reflector to the fixture, but in LED’s case only an angled lens is necessary.

   Some warehouse facilities still have HID lighting in place, and these facilities need an update. When updating from HID, it’s T5 fluorescent fixtures or LED fixtures that make the most sense. Increasingly, lighting experts are recommending LED high bay lights as they offer greater energy savings and require almost no maintenance for years after installation. This can keep operating costs down to a minimum, and makes up for the greater upfront cost of LED.

3. Restaurants and shops – Businesses that rely on attracting patrons have a different goal in mind with their lighting. Restaurants and shops have to draw people in with attractive lighting, ensure the property is easy to traverse and use the lighting to encourage a purchase. The best way to accomplish this is with sophisticated, coherent design.

   LED technology is a natural fit into a modern commercial lighting design as it can be paired with most fixture housings. Further, LED technology is easily controlled so property owners can fine tune how the system looks at all times.

   Although there are plenty of ways to light a shop or restaurant, strong lighting design uses layering to get the most out of the space. Good layering would combine ambient, accent and decorative fixtures to bring cohesion to the property. For example, ambient lighting provides general visibility in the space using linear suspension fixtures, track fixtures, recessed fixtures or something similar. Accent lighting draws attention to points of interest, like restrooms, changing rooms or the checkout area, and it often consists of LED strip fixtures or pendant fixtures to stand out. Decorative lighting can be built into dramatic pendants or chandeliers or even custom designed for something one-of-a-kind. Whatever the choice, decorative lighting with LED technology is ideal, because it can be brought up or down so it always looks perfect.

The Importance Of Photometry In Commercial Lighting

When lighting experts plan out a commercial lighting project they observe photometric principles to ensure the system looks exactly like it should.

What is photometry? Put simply, it’s a way of measuring light so that the human eye is taken into account. Light emits across an entire wavelength spectrum, and our eyes do not perceive them all with the same sensitivity. In other words, some wavelengths (colors) of light are easier for the eye to detect, which means those wavelengths appear brighter in certain settings. Lighting experts consider this when setting up fixtures, because it more accurately represents what people will actually see when the fixtures are powered on.

Photometry is a critical consideration for most lighting projects, and is particularly important for commercial, industrial and artistic applications. For this reason, lighting experts will diagram the system prior to installation, and this provides some valuable information to the installers. For example, photometric diagramming offers clarity on:

• How the entire system will be perceived, at every angle and from every spot on the property.
• Where the light will be most intense and where it will be least intense.
• Potential problem areas where too much or too little lighting is available.
• How far apart the lights should be spaced to ensure even coverage.
• What lighting technologies make the most sense for a particular project.
• How many fixtures will be required, which makes it easier to provide an estimate for the project.

Because photometry is so fundamental to proper commercial lighting design, commercial property owners should prioritize lighting providers and installers that utilize it.

Commercial lighting systems function best when they are designed with the space in mind. A proper commercial lighting system can bring maximum visibility, worker comfort and safety, or smart design to a property. In each case, LED technology offers the best combination of efficiency, reliability and functionality.

Seven Reasons Your Organization Should Switch to LED Lighting

LED lighting has gone from a niche product to a market favorite in just 10 years, and there’s no sign that this trend is slowing down. According to the International Energy Agency, 2021 marked the first year that LED technology was present in more than half of major lighting markets.

Residential, commercial or industrial – LED lighting is a frontline choice for a variety of applications. The question is, why have LEDs captured so much of the market so quickly? There are lots of reasons, but here are seven of the most prominent:

Bring Operational Costs Down With Improved Energy Efficiency

Energy efficient lighting is cost efficient lighting and LED leads in this category by a significant margin. Compared to linear and compact fluorescent fixtures, which are the most popular lighting options behind LED, LED lighting is around 50 percent more efficient. This number may be a little higher or lower depending on how your fixtures are arranged, but the bottom line is that LED technology can shave thousands off your organization’s operating costs over time.

This efficiency bonus is more pronounced over older lighting technologies like HID and halogens. You can expect to drop more than 80 percent of your lighting costs if switching from HID to LED.

LED’s Enhanced Lifespan Lowers Maintenance Costs

The more often your organization has to replace its lighting components, the more expensive it will be to maintain the system. Targeting lamps with a longer lifespan is one way to extend your system’s performance and LED lighting is also the frontrunner here.

The typical LED lamp will last more than 50,000 hours and may provide 100,000 hours of quality light before it needs to be replaced. That means if left on 24/7, an LED light will last for nearly 10 years at the minimum. Compare this to fluorescent tubes, which only remain functional for three to five years before they need to be replaced. Halogens, HIDs and other older technologies may burn out in a year (or even less).

A Longer Life And Strong Durability Means LEDs Are Extremely Reliable

LEDs are also more durable than other lights and are capable of dealing with rough handling. Unlike other forms of lighting, which use flimsy filaments or fragile gas chambers, LED lights are built on solid state circuitry. There’s no weak spot that could result in early failure. This advantage is notable during installation, where the occasional bump and knock is likely to occur. Because LEDs can deal with a little punishment, they are more likely to perform as long as they are rated. That’s additional cost savings.

LED Lighting Is Easy To Pair With Modern Controls

LED lighting has been designed with modern engineering processes, so it is designed to work with modern lighting controls. With dimmers, you can control the exact amount of illumination the lamp outputs. With occupancy sensors, the lights will switch on as soon as someone is nearby. With a photocell, the lights will switch on and off with the sun’s presence. With timers, you tell the LEDs when to operate and when to shut off.

All of this is simple to do with LED’s solid state engineering. It’s not as simple with fluorescent or halogen technology, so LEDs are the choice if controllability is a concern.

LEDs Can Also Be Paired With Existing Fixtures During A Retrofit

LED fixtures have come a long way in a decade. It wasn’t too long ago that installing LEDs meant ripping out the old system and replacing it with something completely new. That was expensive, but it’s no longer the only choice. Now many LED fixtures are designed specifically for retrofit applications and are compatible with most existing lighting systems. Retrofits are possible in most facilities and are a quick, less expensive way to get the benefits of LED without the upfront cost of a new system.

Modern LED Lamps Generate Brilliant Light That Renders Color Well

Much of the discussion around LEDs focuses on efficiency and longevity, but the illumination that LED lights produce is also impressive. LED fixtures output high quality, high clarity light that appears brighter and more neutral than HID or incandescent. Also, while LEDs once lagged behind other lights in their ability to render color, that’s not the case anymore. High-CRI LED fixtures are available and are ideal for either exterior or interior applications. Inside, high-CRI lamps can faithfully represent colors in clothing and artwork. Outside, high-CRI LEDs can help people see better at night, or they can be paired with security cameras for better imaging.

Aim Light Where You Need It With LED’s Directionality

Most lamps emit illumination omnidirectionally. That means they cast light in all directions at once. This can be of benefit in some settings, but it frequently results in a lot of light that’s wasted on the ceiling and low priority surfaces.

LED lamps are directional due to their engineering and can be aimed with precision. There are a couple of benefits to this. One, more light is directed to where it is needed which improves performance and efficiency. Two, LEDs can be targeted at a particular object or area, which can be used in display and security applications.

The Future And Present Of Lighting Is LED

With clear advantages in efficiency, longevity, performance and versatility, LED lighting is poised to dominate the market for the foreseeable future. That’s great news for organizations looking to make the switch to solid state lighting. Like with most technologies that have come before, economies of scale are driving down the cost of LED lights and driving up the quality of engineering. The result is a lighting technology that is across-the-board better than its competitors.

LED canopy lighting offers everything property owners need in a fixture. It is intense, energy efficient, reliable and long lasting, beating out long time options like HIDs and fluorescents in every way. It won’t be long before LEDs are the first choice in canopy lighting, and lighting experts are so impressed with the technology that many are now recommending it for a wide range of applications. The time has never been better for property owners to consider the benefits of LED fixtures.

What Is Canopy Lighting Used For?

Canopy lighting can be installed on residential properties, but it is usually found in front of businesses or in areas that are frequented by people or vehicles. They are always installed in areas that are likely to be active at night, like over a gas station or warehouse. Vertical lighting capabilities, lighting intensity, low operating and maintenance costs and reliability are all essential qualities to have in canopy lighting.

Like the term suggests, canopy lighting is installed directly above the target area offering an intense pool of illumination to ensure visibility and safety. Although canopy lighting can come in pendant, recessed or surface mount forms it is always placed on the underside of an overhang or soffit.

There are numerous applications of canopy lighting. In addition to gas stations, covered walkways, garages, warehouses and industrial facilities, product showrooms are also ideal spots for these fixtures.

Why Should Property Owners Update Their Canopy Lighting?

High intensity discharge, or HID technology was the canopy lighting option of choice for decades, along with fluorescent fixtures. This is a quickly changing trend though as property owners are realizing a boost in savings and performance by switching to LED fixtures. LED technology has replaced HID, fluorescent and other fixtures in many applications including canopy lighting applications.

Why has LED become a compelling choice for property owners? There are several reasons, including:

1. Low energy costs – Canopy lighting must be on for hours at a time, and in some settings it’s better to keep it on even when no one is taking advantage of it. For example, gas stations will keep their fixtures on from sundown to sunrise, because it encourages people to stop and patronize the business. In this instance, canopy lighting provides that sense of comfort and safety that people look for at night.

Low energy and maintenance costs are essential, and LED is far superior to all other technologies in both respects. The advantage is particularly noticeable when comparing LED and HID technology. The important metric here is the watt-to-lumen ratio. The greater the number of lumens per watt, the more efficient it is at converting energy to light.

LED fixtures regularly achieve ratios in excess of 100 lumens per watt, which is impressive. HID manufacturers may advertise similar ratios, but the listed watt-to-lumen number is often way off once the HID fixture is put in practice. That’s because HID fixtures tend to radiate in all directions, so only some of those lumens make it to the ground. Reflectors can offset this, but reflectors are heavy and are not 100 percent efficient. LED, by contrast, does not radiate but is naturally directional. This makes it easier to direct all of the LED’s output toward the ground and achieve a brighter result.

Further, HID lamps degrade faster in performance compared to LED. It’s common to see somewhere close to a 20 percent output reduction after the HID fixture has operated for about 8,000 hours. At this mark, LED fixtures will still be operating near peak output levels. If the lights are kept on for 12 hours a day, it will only take a couple years before the HID fixtures are noticeably dimmer than LED lights with the same watt-to-lumen ratio.

2. Longevity and low maintenance costs – These two go hand in hand, as most of the associated maintenance costs are due to replacement. In this respect, LEDs are often maintenance free for years after installation. That’s because most LED canopy lighting is rated for at least 50,000 hours of performance, and some are rated for twice as long. HID fixtures are only rated for 15,000 to 25,000 hours of performance, but declining performance means HIDs usually have to be replaced before that mark.

LEDs can go for years without being addressed, while HIDs may need to be switched out two or three times during that span. Also, HID fixtures have to be regulated with an onboard ballast and that has to be replaced separately adding to maintenance expenditures. The cost advantage here is clearly in LED’s favor.

3. Controllability – LEDs are built on top of solid state circuitry, while HIDs and fluorescent lights use reactive gases to output illumination. Solid state circuits are far easier to control, responding to the same electrical impulses that a computer utilizes. This added controllability gives LEDs a lot more utility in a few ways.

For instance, LED canopy lighting switches on instantly and does not need to be warmed up even in temperatures as low as -30 degrees Fahrenheit. Consider HIDs, which need several minutes to reach full intensity. LEDs also do not flicker and can be aimed with greater precision than HIDs. The result is more consistent, more even and more comfortable lighting.

Most LED canopy lighting can be dimmed when necessary, and dimmers can be tied to occupancy controls so intensity drops slightly when no one is around. The drop off is minor and as soon as someone enters the area the lights return to full intensity immediately. Occupancy controls and dimmers, though, ensure operating costs are kept to a minimum. They also extend the fixture’s life, offering more performance out of every fixture.

Canopy lighting pushes back the darkness and provides a sense of safety. It’s a must-have for businesses that remain open around the clock, so property owners should carefully consider their lighting options. LED fixtures are the superior option over HIDs, fluorescents and other technologies, and aren’t just the future of canopy lighting, but the present as well.

Fluorescent T8 tubes have been a lighting mainstay for decades, but the development of LED T8 linear lighting means there’s a high-performing alternative. Is this a case of new replacing obsolete technology, or is there room for both fluorescent and LED T8s? It depends on the application. There are still some settings where fluorescent tubes make sense, but LED T8s have several advantages over their older counterparts. Some of them include:

• Reliability – LED T8 lighting has a lifespan of about 50,000 hours. Some fluorescent T8 tubes are rated for 50,000 hours as well, but there are several fluorescent specific issues that can cut into that lifespan significantly. For one, fluorescent tubes are more likely to prematurely fail if they are switched on and off frequently. They are also adversely affected by cold temperatures and require a ballast, which will also eventually fail and require a replacement. These issues limit fluorescent lighting’s effectiveness in some applications, like those that require occupancy sensors.
  LED T8s don’t have these drawbacks and are far less likely to fail early. When comparing cost, it’s important to factor in LED’s long-term reliability.
• Lighting quality – Fluorescent T8s can output a lot of light, but the quality of that light is inferior to LEDs in a couple of ways. LED lighting emits directionally so more of the light that LEDs emit can be aimed where it is needed. This can be useful in general lighting applications because more of the light can be aimed downward. LEDs are also useful in applications where concentrating the illumination is important, like in workshops. Fluorescent T8 lighting emits omnidirectionally, and some of that light is wasted in the process.
  LED technology also surpasses fluorescent lighting in color rendering. In other words, LED will display colors more accurately. While there are some high-CRI fluorescent tubes on the market, they are among the most expensive available. Fluorescent fixtures emit light beyond the blue and violet end of the visible spectrum, so they render warm colors especially poorly. The UV light that fluorescent tubes emit is also harmful to the colors in surrounding objects and will cause them to fade with long-term exposure. LED fixtures produce close to zero UV light, by contrast.
• Controllability – LED fixtures are designed to be compatible with modern lighting controls and can be easily attached to motion sensors, photocells, timers and dimmers. This gives LED technology the versatility advantage and it also means a big efficiency boost in many settings. Fluorescent T8s cannot be dimmed as easily as LED T8s and they are a poor fit with occupancy controls.
• Environmental – Fluorescent tubes work by exciting mercury vapor and creating light through a process termed fluorescence. Mercury vapor is a critical part of the phenomenon, but it is also harmful if it is exposed to people or the environment. For this reason, fluorescent tubes are treated as hazardous waste and their disposal may be subject to regulation. LEDs do not contain harmful chemicals or materials and may be disposed of without extra effort.

The only advantage that fluorescent lighting has is its cost. Fluorescent T8 tubes have been around for a long time and are cheap, while LED T8s are new and cost more upfront. However, the superior lifespan, efficiency and versatility of LED linear tubes can make them the more cost-effective option in the long run. There is also room for improvement in LED tube lighting and it’s likely that future generations of LED linear lighting will expand the technology’s advantages.

What Applications Are The Best Fit For LED T8 Linear Tube Lighting?

While fluorescent T8s are still useful in applications that call for a high volume of general lighting, LED T8s are starting to replace them in many settings. Some of those applications include:

• Any lighting solution that requires occupancy controls – Office buildings, schools, retail shops, government buildings, industrial facilities and anywhere else high foot traffic is expected. LED’s durability and controllability are unmatched for these applications.
• Any setting where cold temperatures are expected – If the lighting is going to be exposed to lower temperatures, LED T8s will prove much more reliable. Workshops, garages, outdoor walkways and sheds are spots where LED’s cold resistance is useful.
• Any setting where the lights will be powered on and off regularly – LED tubes tolerate frequent powering on/off much better than fluorescent tubes. For this reason, LED linear lighting is a good choice for high traffic areas like residential and commercial hallways, kitchens and bathrooms.

For safety reasons, it’s also a good idea to consider LED T8s if there’s an increased likelihood of the fixtures experiencing breakage.

What are the different types of LED T8 tubes?

There are multiple LED T8 models on the market and some of them are ideal for retrofit applications. Labeled Type A, Type B and Type C, the primary difference between these models is how they work with existing fluorescent ballasts. Here’s a closer look at the three:

• Type A – Type A LED tubes are designed to draw current through the existing ballast and power an LED driver that’s integrated into the tube. Type A T8s are the easiest and least expensive to install because they can be plugged in right where the fluorescent tube was removed. However, Type A LED tubes tend to be less efficient and because they rely on an existing ballast, they cost more to maintain over time.
• Type B – Type B LED tubes are built with an internal driver that bypasses the ballast. This removes the ballast from the equation completely and optimizes the conversion from watts to lumens as a result. Type B tubes are also available in the widest array of lengths. Installation is more difficult and costly with Type B tubes, though, because the ballast and potentially the fixture sockets will need to be removed. This can pose a major safety hazard if not handled by a licensed and experienced professional.
• Type C – Type C LED tubes utilize an external driver instead of an internal one. This external driver may be remote and it also removes the ballast as a functional part of the system. Compared to other LED linear lighting types, Type C tubes require the most work to install, however, they are the most efficient and controllable of the three.

Fluorescent T8s have a long and successful history in the lighting industry, but LED T8s are catching up. In many applications they are already ahead, and as LED lighting technology improves, so will LED’s already impressive reliability, lifespan, efficiency and flexibility.

Benefits of LED lighting for industrial facilities is something that is often overlooked when in reality they have the potential to make work more productive and efficient. The lack of appropriate lighting could lead to quality control and safety issues for both workers and consumers, a situation that could be avoided with better lighting.

If you are the owner of an industrial facility and are finding yourself or your employees noticing inefficient lighting or the constant stoppage of work to replace light bulbs take a few minutes to learn about LED lighting and the benefits it can provide for your facility.

Drawbacks of an Industrial Facility Without LED Lighting

Lighting paves the way for the majority of things we do on a daily basis. It’s readily available and easy to take for granted without even realizing it. For industrial facilities proper high bay lighting is a necessity, but the question then becomes are you making your lighting really work for you? Is it helping your business to thrive?

Subpar lighting can lead to serious and potentially dangerous problems including but not limited to:

• Safety hazards
• On the job injuries
• Improper product assembly
• Compromised product lines
• Repeated failure of quality inspections

Not only could these situations put workers’ safety at risk, but it might also have the power to negatively impact a company’s bottom line. In short, subpar lighting is not an option for industrial facilities which is why many are turning to LED lighting in record numbers.

LED Lighting

Lighting is a key component of the workplace. Subpar lighting can make most kinds of tasks nearly impossible to do. What many companies do not realize is that the type of lighting they use can impact their bottom line, for better or worse.

Historically, lighting has been comprised of options such as high-pressure sodium, florescent, or metal halide lighting. While these may have been ahead of their time years ago, the mass use of LED or light emitting diode lighting is quickly making these options more obsolete. For example, many LED bulbs have the capacity to produce light up to ninety percent more effectively than most incandescent bulbs.

LED bulbs also tend to last much longer than their older counterparts. The longer lifespan of a bulb can equal less time replacing bulbs which means less lost time in a facility that would have normally had to shut down to replace these bulbs. As an added perk, LED lights seldom go out unexpectedly with a bright flash. They are instead designed to slowly dim over time, allowing companies a longer window to replace a bulb when needed.

Benefits of LED Lighting for Industrial Facilities

LED lighting is earning its place in businesses, warehouses, and industrial facilities across the nation as companies seek to improve their lighting efficiency. While it is worth noting that a company may have to pay upfront costs to have lights retrofitted for LED capabilities, this option yields savings on energy bills that will eventually pay for the installation.

When considering the advantages of using LED lighting, it can make any other type of lighting seem like an inefficient use of resources. Some of the key benefits of LED lighting for industrial facilities include:

• Encouraging alertness – Workers may become prone to be less focused during a mid-afternoon post lunch slump or in the early morning for those that work night shifts. A significant but often unmentioned benefit of LED lighting is that its direction and brightness can assist in keeping some workers more alert.
• Creating a higher level of safety – In addition to the brighter, directional power of LED lighting, there is the added benefit of offering facility workers a higher level of safety that can come with improved indoor visibility. Using LED lighting in this setting may help prevent accidents caused by poor visibility such as injuries, collisions, or misuse of special equipment.
• Improving quality control – LED lighting has the capacity to be directed to specific areas rather than uniformly blanketing larger areas. This allows the light to be directed to areas with the greatest need for focused light, such as quality check of production.
• Less switching out of light bulbs – Once the initial retrofit is performed to allow for LED lighting, these lights tend to last for longer periods of time than some less modern options. This saves companies from having to replace light bulbs as frequently which is instrumental in keeping facility production running smoothly and avoiding shutdowns for bulb replacements.
• Saving on energy bills – Since LED lights tend to last longer than their more traditional counterparts, when used in a high bay lighting setting it could reduce the amount of energy used by as much as sixty percent. This type of savings can have a welcome domino effect when used on multiple fixtures and may allow a facility to put energy bill savings toward other areas of need.

It can be easy to look at the above and think this would be helpful but not doable in terms of time or money. It may be helpful to stop and translate some of these bullet points into actual dollar amounts. For example, how much money would the company stand to save in one year if the energy bill is cut by sixty percent? How could those same savings add up over two years? The answer may have you realizing that the time and money you spend up front on this type of upgrade can more than pay for itself over time with energy savings.

The benefits of LED lighting for industrial facilities are too abundant to ignore for the company owner that seeks high levels of efficiency and productivity. Reach out to a reputable lighting provider today to learn what switching to LED lighting could mean for your facility.

Why LED Parking Garage Lighting matters for both safety and appeal:

One of the first things people notice when pulling into a parking garage is the lighting. Is there enough of it? Is it bright enough? Is it helping me figure out how the garage is laid out? These are the kind of questions people reflexively ask themselves when using a parking garage. It’s clear that lighting should be a priority.

Outdated or failing lighting systems are not capable of producing enough light for visitors to maintain adequate visibility. Poor lighting can also lead to security issues and can confuse people attempting to navigate the garage, leading to frustration.

Modern lighting systems, and LED lighting in particular, can provide a garage with excellent lighting coverage, intensity and efficiency. Compared to outdated HID lighting systems, LED technology represents a major step forward for parking garage lighting.

Why LED Lighting is the best option for parking garages:

Parking garages are expected to be available around the clock and must be as low maintenance as possible. LED lighting fits perfectly into this objective for several reasons. They include:

1. Security – The Bureau of Justice Statistics tracks, among many other things, the number of crimes that occur in parking garages. From 2004 to 2008, the bureau tallied up nearly 2.5 million crimes in U.S. parking garages. Of these, more than 15 percent were violent crimes.
   People often feel vulnerable in parking garages, and if there isn’t adequate lighting in the space, then that feeling will only be more intense. Older lighting systems are prone to outages and declining luminous intensity, and this can leave people in the dark. Anyone using the garage at night will likely take notice as well, and this may push people into finding an alternative.
   Bright and even lighting ensures there are no dark areas where someone could hide. Every part of the garage is easy to see, allowing visitors to drive and walk around with confidence.
   LED lighting is prized for its ability to produce even illumination, and this is thanks to the technology’s engineering. LED fixtures are directional by nature, which means they emit in a tighter angle than other fixtures. This allows for easier, precise aiming, and lighting experts can utilize this when diagramming and laying out LED fixtures.
2. Safety – According to the National Safety Council, there are more than 50,000 accidents in parking garages every year, resulting in around 500 deaths. Parking garages can be hazardous for drivers and pedestrians alike, especially if there is inadequate lighting in the garage. Poor lighting reduces visibility and makes it difficult to detect motion at a distance. At night, visibility may be reduced to the point where completely preventable accidents occur.
   Even illumination helps people feel more secure, it will also improve safety. LED lighting will eliminate the kind of dark spots and shadows that can affect driver visibility, ensuring drivers aren’t caught off guard by pedestrians.
3. Low maintenance – Most parking garages are effectively giant mounds of poured concrete. They are intended to be sturdy, rugged structures that only need occasional maintenance. Aging lighting systems put pressure on garage owners to constantly address maintenance issues. As fixtures enter their decline phase, they produce less and less light and may blink out for good at any time. It only gets worse with time, as some lights will need to be replaced while others may still have a bit longer to go. This can lead to maintenance call after maintenance call, costing the owner more money to maintain failing systems.
   This is a major problem with older technologies like HID lighting. These lights may only last thousands of hours before their illumination output becomes unacceptable. Most won’t make it past 10,000 hours. However, LED lights normally provide at least 50,000 hours of performance, and it’s common for LED fixtures to last much longer than that. Longer performance means fewer replacements, and that saves the owner money and time.
4. Durability – It’s rare for a parking garage to be shielded from the elements to any degree. They aren’t climate controlled, which means rain, snow, ice and intense heat are all issues that the garage’s lighting will have to contend with. Drivers are another hazard for lights that are installed closer to the ground, and one will eventually bump into an expensive fixture.
   Fortunately LED lights are particularly durable and are often used in tougher environments for this reason. They handle physical shock better than all other lighting options, so they can take the occasional bump without failing. LED fixtures are also able to withstand unconditioned environments with ease, ensuring they remain operational even during the worst conditions.
5. Controllability – Occupancy controls are a must in parking garages, as lighting is essential when people are navigating through the garage, and a waste when no one is present. Fortunately, LED lighting is designed for maximum controllability, and can be easily tied to occupancy sensors, dimmers and other control options.
   Parking garages can be confusing to many people, as they aren’t laid out like any other building. LED lighting with the proper controls can help with this, as well, as the fixtures can be set to flash, change color, or otherwise get attention. This is a simple way to help people find their way, and to do so in the safest way possible.

Parking garage lighting can greatly enhance the building’s utility as long as the right lighting solution is put in place. LED lighting is that solution for most parking garages, and will provide years of reliable, low maintenance service.

Security lighting is an essential component of public safety, and the statistics back this up. The Bureau of Justice tracks crime events in areas like parking garages and parking lots, and every year, about 10 percent of all property crimes and eight percent of all violent crimes happen in these places. The Department of Justice (DOJ) is also aware of these numbers and considers security lighting to be a primary line of defense against criminal activity.

In 1996, the department released a report in which it stated that “good lighting deters crime and produces a more secure atmosphere”. It is one of the few facility features that has been documented to reduce crime in parking facilities.”

In other words, while a lot of time has been spent researching how to make properties safer, security lighting remains one of the best layers of defense a property owner can invest in.

How does security lighting make public areas safer?

Professionally placed and installed security lighting is designed to make a property difficult for criminals to deal with. Criminals prefer concealment, especially in public or common areas like parking lots and apartment grounds. In these spots, there may be few places for a criminal to hide, and sufficient lighting reduces their options further. This often serves as a deterrent.

Deterrence, though, is only part of the security lighting equation. With added illumination comes greater visibility, and if people can see well into the distance they can assess potential threats long before they become an existing threat. People rely on this fact in well-lit areas, which is why illumination provides a sense of comfort. It’s also why well-lit properties are more attractive to drivers and pedestrians.

Finally, security lighting improves facial recognition efforts so if a crime does occur in an illuminated spot it will be easier for police to find the perpetrator. This is something that commercial and industrial properties rely on, which is why they pair security camera systems with high intensity, motion-activated lights.

Also, extra lighting is always helpful in a place where pedestrians and vehicles occupy the same space. Parking garages and lots require excellent visibility to prevent accidents, and security lighting can help in this regard. It’s a true multi-tool.

How can LED wall pack lighting improve security and safety?

There are several forms of security lighting, and LED wall packs are one of the staples. Wall pack lighting is called such because it is usually installed on the structure’s exterior walls. They are extremely versatile and can be placed almost everywhere as long as there is a wall there to hold it up. This makes wall pack lighting a common sight in parking lots and garages.

Aside from their versatility, why should public and common spaces consider LED wall pack lighting? There are several reasons including:

1. Improved coverage – Wall pack fixtures are compatible with most forms of lighting, including halogen, fluorescent, high intensity discharge (HID) and LED technology. Of these, LED technology represents the best performing option.
   When talking about security lighting performance is measured in intensity and uniformity. It is critical that a security lighting system output enough illumination to deter crime and ensure that level of intensity is achieved across the entire installation. LED technology does this better than any other lighting option, as it is directional by design. Other technologies, including HID and fluorescent fixtures, emit in a radiant pattern which makes it harder to control where the light goes. LEDs, though, can be precisely aimed and metered, so it’s simple for the lighting expert to achieve optimal uniformity.
2. Better color rendering – Older HID options, like low pressure sodium vapor and high pressure sodium lights, emit a deep yellow hue of light. It’s difficult for the human eye to render color under this type of lighting cast, reducing the effectiveness of HID from a distance.
   LED technology, though, can emit a color temperature close to neutral white, ensuring superior color rendering and allowing people to perceive their surroundings as they are. This is a comfort to most people and it also makes it easier for drivers to detect nearby pedestrians faster, which is always something to consider.
3. Superior efficiency – Older wall pack fixtures that run on HID technology may require upward of 400 watts to function, and most fall in the 100 to 175 watt range. LED wall pack lights, though, provide comparable illumination intensity and better coverage while needing far less energy. It’s common to see LED wall pack lights in the 30 to 80-watt range, which can help keep energy expenditures at a reasonable level.
4. Long lasting – LED technology also lasts much longer than other lighting options. This is largely because LED fixtures do not experience a sudden decline in performance once they reach a certain age. Instead they gradually lose their intensity, and for years this drop may be imperceptible. In fact, the functional life of an LED wall pack fixture may be in excess of 50,000 hours, and the fixture needs little maintenance during this time.
   Compare this to HID technology, which has a rated life of somewhere around 20,000 hours. In many cases, a HID fixture will produce insufficient light before that mark, so it’s normal to replace an HID lamp three or four times before a single LED replacement is required.

What other types of security lighting are recommended?

Wall pack lights are an important part of any security lighting system, but they are just one part. Parking lots should also be illuminated with pole-mounted fixtures, and flood lights can also provide a high intensity spot when necessary.

Ideally, a security lighting system would also rely on modern lighting controls to improve the system’s performance. Motion-activated lights, for example, trigger when someone is nearby, which can expose criminals and alert everyone nearby to their presence. Occupancy controls like motion sensors are perfect for flood lights, as their high intensity costs more energy to run over many hours. Security lighting may also be tied to timers, which can instantly switch the system on at night and off once daylight is detected.

Security lighting is one of the most cost-effective investments a property owner can make for safety. That investment should include LED wall pack fixtures, as well as pole-mounted lights and lights tied to modern controls.